Transformer Oil Treatment Machine / Oil Filtration Machine (ZYD-I)
|FOB Unit Price:||US $10,000 US $9,800|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Production Capacity:||100 sets/month|
|Transport Package:||wooden cases|
|Payment Terms:||L/C, T/T|
- Model NO.: ZYD-I
- Application: Transformer Oil
- Folw Rate: 100 L/min
- Breakdown Voltage: 70 Kv
- Gas Content: 0.1%
- Acidity: 0.03 Mgkoh/G
- Temperature Range: 20~80 °c
- Heating Power: 36~120kw
- Specification: CCC, ISO9001, CE, SGS
- HS Code: 90278099
- Certification: ISO9001, UL, SGS, RoHS, CE
- Voltage: 380V
- Vacuum Degree: 0.08~ -0.099 MPa
- Water Content: 4 Ppm
- Particles Size: 1~5 Without Free Carbon
- Dielectric Loss Factors: 0.001
- Working Noise: 65~80 dB(a)
- Trademark: ZHONGNENG
- Origin: China
The Zhongneng Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers especially for the power, which is over 110KV. Also it can inject the insulating oil into the transformers on-line. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new. For special application, the system also can be mounted on a leak proof base and can be installed and operated on a trailer. Oil Treatment Machine / Oil Filtration Machine Oil Filtering/Oil Separation/Oil Recycling
1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating particles, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid-alkali water-solubility.
2. Operational can be P. L. C (Programmable Logic Controller).
3. Unique vacuum dehydration, degassifier, regeneration system, adopt stereo-evaporation technology, high efficiently remove water, gas, particles from transformer oil, improve oil quality and dielectric strength.
4. Duplex 3D stereo-evaporation, eliminating the liquid water quickly
5. UK g technology by which the trace water that is show chain, such as dissolved water, can be removed effectively.
6. Instinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power
7. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.
8. Specially applied to vacuum oiling and drying for power transmission equipments.
9. The oil of any grades can be treated either on- or off-load.
10. Special oil pump design with lower noise.
11. Special additives for depolarization, can recover oil color of aged transformer oil to new, equipped with flexible unloading device of short time, good efficiency small quality. Discolor under vacuum can save cost of treatment, the waste impurities doesn't pollute environment (it can be used to architecture and road pave)
|Working vacuum||MPa||0.08 - 0.099|
|Temperature Range||C||20- 80|
|Power||Three Phase 50HZ 380V (as per the customer's requirements)|
Comparing with the single-stage vacuum oil purifier, this machine can dewater, degas and removes the impurities more quickly, more completely, and makes the oil BDV (Breakdown Voltage) of 70 kV or higher. As the bridge-type vacuum linking system that can purify and also can be an independent vacuum power supply, this machine can treat the electric insulation devices.