Waste Engine Oil Recycling System
|FOB Price:||US $65,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $65,000/ Piece|
|Production Capacity:||300 Sets/Month|
|Transport Package:||Wooden Case|
- Model NO.: LYE-1000
- Flow Rate: 1 ~ 15tons/Day
- Working Pressure: -0.095~0.4 MPa
- Working Noise: Less Then 70dB(a)
- Heating Power: 192 Kw
- Inlet/Outlet Pipe Diameter: 40dn
- Trademark: zhongneng
- Origin: Chongqing, China
- Application: Engine Oil
- Rate of Reclamation: 75%~95%
- Range of Temperature Control: 80~180 Celsius
- Power Supply: 380V/3p/50Hz (or as Per Required)
- Total Power: 216 Kw
- Labors Needed: 2 ~ 3
- Specification: CCC, ISO9001, CE, SGS
- HS Code: 90278099
LYE used engine oil regeneration system is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, cooling oil etc are used. Gas/Diesel engine oil used in the field of transportation like shipping, land-carriage etc. also can be treated with regeneration by LYE series machines.
II. Product description
LYE series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil from car, motor, truck, ship, mines, electrical power and so on.
It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas/diesel engine oil, bitumen and colloid and other sludge can be removed similarly.
After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas/diesel engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas/diesel engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.
|Analysis Item||Unit||Result Values||Method|
|Color (ASTM)||L3.0||ASTM D1500-04a|
|Density @15ºC||g/cm3||0.8770||ASTM D4052-96(2002)e1|
|Kinematic Viscosity @ 100ºC||mm²/s||11.6||ASTM D445-06|
|Kinematic Viscosity @ 40ºC||mm²/s||44.78||ASTM D445-06|
|Viscosity index||119||ASTM D2270-04|
|Flash point||ºC||232||ASTM D92-05a|
|Pour point||ºC||-24||ASTM D97-06|
|Conradson Carbon Residue||%(mm)||0.01||ASTM D189-06e1|
|Water||mg/kg||100||EN ISO 12937-2000|
|Sulfate ash content||%||0.172||GB/T 2433|
|Acid number||mg KOH/G||0.04||GB/T 7304|
|Water soluble acid/alkali||Nil||GB/T 259|
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.
IV. The machine is composed of following systems:
. Reaction system (reactor, blender, oil pump);
. Heating system (heater, circulation oil pump, heat exchanger);
. Filtering system (filtering equipment body, strainer sheet, moving-start equipment lock-down equipment)
. Exhaust gas processing system (gas exhausting machine, radiator, cooler, water container, exhaust gas processor, exhaust gas filtration)
. Electrical control system.
|Item||Unit||LYE-1000 ~ LYE-15,000|
(also can be designed to larger models as per request)
|Flow rate||tons/day||1 ~ 15|
|Rate of Reclamation||%||75~95|
|Range of Temperature Control||ºC||80~180|
|Power Supply||380V/3P/50Hz (or as per required)|
|Heating Power||KW||192 (for 10 tons/day)|
|Total Power||KW||216 (for 10 tons/day)|
|Inlet/outlet Pipe Diameter||DN||40|
|Labors needed||---||2 ~ 3|
|Dimension (for 10 tons/day)|
The size is subject to actual machine
|Exhaust Gas Processing System||950x2000x3300|
|Weight||Kg||2000 ~ 7500|